manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Owner'S Manual, Page: 115 / 348

Share
Download
MARUTI SUZUKI S-Cross Owner'S Manual Download Page 115

3-16

OPERATING YOUR VEHICLE

64MS0-74E

Engine Power Assist Function

While the vehicle is running, ISG assists
engine power as a motor in the following
limited condition. This reduces engine
loads and improves fuel consumption.

While the vehicle is running with the
engine speed at approximately 2500 rpm
or less, engine power assist function will
be activated when all of the following con-
ditions are satisfied.

• SHVS system and ENG A-STOP system

are working properly. (“ENG A-STOP
OFF” indicator light is not blinking.)

• Brake pedal is not depressed.
• ABS is not activated.
• Accelerator pedal is depressed slightly

for acceleration.

• Battery is fully charged and the battery

inside temperature is in normal condi-
tion.

• Engine coolant temperature is in normal

condition.

• Headlights are off.

NOTE:
• The engine power assist function may

not work while the battery capacity is
being checked right after the engine
start, and so on.

• The subjective feeling of the horn sound

and A/C blower speed

 

is likely to be dif-

ferent when the deceleration energy
regenerating function and engine power
assist function are active.

Starter Motor Function

After the engine auto stop by the ENG
A-STOP system, the engine will be
restarted using a cranking power of the
ISG.

The starting with the ISG is quiet com-
pared with starting by the conventional
starter motor.

“SHVS” Indicator Light

79MH10205

“SHVS” indicator light will come on during
operation of deceleration energy regener-
ating function, engine power assist func-
tion or starter motor function.

Refer to “Warning and Indicator Lights” in
the “BEFORE DRIVING” section for
details.

ENG A-STOP System 
(Engine Auto Stop Start 
System)

The ENG A-STOP system (Engine Auto
Stop Start System) automatically stops and
restarts the engine without operating the
ignition switch or the engine switch when
the vehicle is stopped, such as at a traffic
signal or in a traffic jam, to reduce exhaust
gases and fuel consumption.

• When the vehicle will be stopped for a

long time or when you will leave the
vehicle unattended, turn the ignition
switch to the “LOCK” position or press
the engine switch to stop the engine.

72M2042

EXAMPLE

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments