manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Owner'S Manual, Page: 145 / 348

Share
Download
MARUTI SUZUKI S-Cross Owner'S Manual Download Page 145

5-2

OTHER CONTROLS AND EQUIPMENT

64MS0-74E

To reinstall the fuel filler cap:
1) Turn the cap clockwise until you hear

several clicks.

2) Close the fuel filler lid.

Engine Hood

64MS138

To open the engine hood:
1) Pull the hood release handle located on

the outboard side of the driver’s side of
the instrument panel. This will disen-
gage the engine hood lock halfway.

64MM05002

2) Push the under-hood release lever

sideways with your finger, as shown in
the illustration. While pushing the lever,
lift up the engine hood with the other
hand.

WARNING

Fuel is extremely flammable. Do not
smoke when refueling, and make
sure there are no open flames or
sparks in the area.

WARNING

If you need to replace the fuel filler
cap, use a MARUTI genuine cap. Use
of an improper cap can result in a
malfunction of the fuel system or
emission control system. It may also
result in fuel leakage in the event of
an accident.

EXAMPLE

CAUTION

The release lever can be hot enough
to burn your finger right after driving.
Touch the lever after it becomes cool
enough.

NOTICE

Make sure that the wiper arms are not
raised before you lift up the engine
hood to avoid damaging the wiper
arms and the engine hood.

EXAMPLE

Summary of Contents for S-Cross





























































































































































































































































































































































Reviews:

No comments