5 - Removal and Re-installation
ExpressCard 2000 / ExpressCard 3000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 242 of 356 (
D99875607-91
)
Figure 5-103 - Disconnecting Exit Transport MSR Cable
20)
Use the 5/32” and 1/8” hex wrenches to remove the eight sets of screws and washers that secure the
modules to the top deck plate, shown in
, and set the screws aside.
21)
Carefully lift the exit transport module and tipper module out of the device as a single unit and set
them aside. Hold the modules together so the cables between them do not tear loose.
