3 - Preventive Maintenance Procedure (EC2000)
ExpressCard 2000 / ExpressCard 3000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 39 of 356 (
D99875607-91
)
3)
On the touchscreen, navigate to
Menu
>
Settings
>
Service
>
MCP Cmds
to open the
Controller Commands
page.
4)
Use the
white
cleaning card and
do not let the rollers take it out of your hand
as you clean each set
of rollers as follows:
a)
Feed the cleaning card partly into the hopper shuttle and press the
Roll To Printer
button. Hold
the card there until the rollers stop moving.
Figure 3-1 - Cleaning the Hopper shuttle Rollers (TOP VIEW FROM FRONT)
b)
Feed the cleaning card partly into the
left
side of the exit transport and press the
Exit Eject
button. Hold the card there until the rollers stop moving.
Figure 3-2 - Cleaning the Left Side of the Exit Transport (TOP VIEW FROM FRONT)
c)
Feed the cleaning card partly into the
right
side of the exit transport and press the
Exit Reject
button. Push inward to keep the card from being pushed out until the rollers stop moving.
