6 - Adjustments
ExpressCard 2000 / ExpressCard 3000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 320 of 356 (
D99875607-91
)
6
Adjustments
During scheduled maintenance or after replacing a module, testing may reveal that the settings for one or
more of the modules in the ExpressCard need to be adjusted.
This section is intended to be used as a
reference only when needed,
and provides step-by-step instructions for adjusting calibration settings.
6.1
How to Calibrate the Touchscreen
If finger presses on the touchscreen are registering in the wrong place (for example, after replacing the
touchscreen), follow these steps:
1)
Contact MagTek Support Services for assistance signing in to the device as an administrator and
accessing the Windows desktop.
2)
Stand
in front of the device (do not sit), because calibration depends on your viewing angle and most
users will be standing in front of the device placed on a countertop.
3)
On the touchscreen’s Windows desktop, open the
Tools
shortcut to open the
Tools
folder.
4)
From the
Tools
folder, launch the
eGalaxTouch
shortcut (EC3000) or
Touchkit
shortcut
(EC2000) to open the
eGalaxTouch: USB Controller
or
Touchkit : USB Controller
window.
5)
Select the
Tools
tab.
6)
Press the
4 Points Calibration
button.