5 - Removal and Re-installation
ExpressCard 2000 / ExpressCard 3000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 210 of 356 (
D99875607-91
)
Figure 5-72 - Unlocking XY Transport Ribbon Cable (TOP VIEW FROM LEFT / REAR LEFT VIEW)
5)
Open the clip that secures the ribbon cable to the top deck plate.
6)
Disconnect the ribbon cable from the circuit board on the top deck plate, and set the cable aside.
7)
If there is adhesive on any of the connectors, peel or gently scrape it off and discard it.