Users manual for Innowalk Pro 2
Version: 1.06
–
Version date: 06.12.2023
Page
8
of
78
4.
Transfer in/out and attach the user
4.1
Preparations
If this is the first-time use, adapt the Innowalk for the user first (chapter 6). This section presupposes
that the user has been assessed by a clinician with medical responsibility and approved to be a
candidate to use the device.
Make sure that the Warnings chapter 7.5 is read and fully understood before using the product.
Prepare the product before the user can be transferred to the Innowalk:
-
Open the chest and hip belt.
-
Swing out the chest support.
-
Rotate the swivel seat (if this function is used during transfer)
-
Lay down the leg supports on the skis. The leg supports can be lowered even further by doing
the following: release the index bolt on the leg support and pull the upper part of the
support upwards. Pivot the leg support to the side and lay down the leg support parallel with
the skis. This allows more open access for transfer and to position the users feet on the
footplates.
The Innowalk is now ready to be used and the user can be transferred to the Innowalk.
Picture 2
- Preparations before transferring
Chest strap
Leg support
Side support
Skis
Leg support index bolt