Users manual for Innowalk Pro 2
Version: 1.06
–
Version date: 06.12.2023
Page
14
of
78
Swing out upper part of the leg support:
If a hoist is used for transfer it is recommended to release the index bolt and swing away the leg
support and leave the guide-straps on the hooks. This allows for open access to the seat and reduces
handling time.
Swing out the upper part of the leg support: 1. Pull out the index bolt. 2. Lift the leg support upwards
3. Rotate it. Reverse to turn it back. Make sure that the upper part of the leg support locks securely
when it is returned.
Picture 10
–
Swing out upper part the leg support
Important: The tension over the users knees is regulated by adjusting the length of the
guide-strap. Note that the length of the guide-strap is in accordance with the users joint
mobility. Too short a strap can lead to overstretching of the users knees, which in the worst
case can lead to damage to muscles and joints.
Important:
Make sure that the guide-
strap isn’t touching any parts of the
Innowalk
during use. This will cause damage and/or wear of the guide-strap.
Important:
Before attaching the guide-strap to the leg support, ensure that the guide-strap is
undamaged and moves freely with the pulley tower. If the guide-strap is worn, it must be
replaced before the Innowalk is used again.
Index bolt
1
b
o
l
t
2
b
o
l
t
3
b
o
l
t