Users manual for Innowalk Pro 2
Version: 1.06
–
Version date: 06.12.2023
Page
28
of
78
Once the Innowalk has been moved/transported to the desired position, the transport wheels must
be cranked up under the cover again. Ensure that the Innowalk is standing on the rear feet before
use.
Turn the crank armanti-clockwise to raise the wheels back under the cover and the wheel pin is back
to the starting position. The rear feet are now in contact with the ground. Release the wheel hook on
the pulley arm from the wheel pin. The Innowalk is now ready to setup for the next user and start
using.
Picture 25 - Transport wheels lowered and in active position.