Users manual for Innowalk Pro 2
Version: 1.06
–
Version date: 06.12.2023
Page
16
of
78
5.
Use
When the user is securely placed in the Innowalk, the movement can start. Release the Emergency
stop button by turning it and set the Power switch to "1". The Innowalk will now run a start-up
sequence. Do not press any buttons during the start-up sequence. Please wait until the Innowalk
makes two short beeps. The Innowalk is ready to be used after the two beeps.
(If you press any
buttons during the start-up sequence, then the start-up will fail, and you need to unplug the
Innowalk, wait 30 seconds, and redo the start-up sequence as described above).
Important:
The responsible person supervising the use of Innowalk is responsible for all adjustments
made by the remote control and shall have received training before operating the remote control.
5.1
Remote control
Picture 11+12
–
Remote control for Medium and Large, with remote control for Small to the right
Innowalk Pro Small uses a 6-button remote control, and the Innowalk Pro Medium and Large uses a
8-button remote.
To activate the functions on the Innowalk buttons on the remote control needs to be pressed, and on
some buttons held down. The Innowalk has no autonomy, as all state changes are executed by
button pressing and/or holding down a button. The following operations can be executed:
Start/Stop:
Press and hold the start remote-control button for 2 seconds to start movement. This
starts the elliptical movement of the legs. Pay close attention to the users legs during start-up, and
make sure the user does not experience any discomfort when moving his/her legs. To stop the
movement, press the stop button. To start or stop the leg movement, one short push of the button
is enough.
Speed up (rabbit) / slow down (turtle):
Press one or multiple times on the remote-control speed
button to alter the speed. The movement speed can be increased or decreased by pressing these
buttons. Always pay close attention to the user when increasing the speed, and always increase
speed in small steps to ensure that the user is comfortable with the speed and speed increase. Never
ramp up to max speed by holding the speed up button in until the unit is at max speed, as this may