Users manual for Innowalk Pro 2
Version: 1.06
–
Version date: 06.12.2023
Page
50
of
78
15)
Always disconnect the power cord when the product is not in use.
16)
Always wipe up water/liquid/body fluid spillage on the product. Test the product without the
user once dried to check that it performs normally. Contact your MFM representative if the
product does not perform as intended.
17)
If the remote control accidently is dropped to the floor or in another way is damaged, then check
that the housing and buttons are intact, and test all functions before using the Innowalk with a
user again. If the remote control is broken, do not use the Innowalk, and order a replacement
remote control from your Made for Movement representative.
Additional warnings for Innowalk Pro 2 (in addition to Innowalk warnings)
1)
Always pay attention to the users feet and hands when rotating the swivel seat. Ensure that the
feet and/or the hands do not get caught or obstructed when rotating the seat. Always use slow
movements when rotating the seat to ensure safety.
2)
Always pay attention to the users legs and thighs when adjusting the seat depth, and when
raising the user up or down from sitting to standing. Make sure the legs and thighs follow the
seat without causing pressure or drag forces when raising up and sitting down. Adjusting the seat
depth and raising up and down the user requires a trained operator.
3)
Do not touch the USB wiring connectors and the user at the same time.
Be aware of the trap hazard areas.
Picture 44 - If the Innowalk should be lifted, always lift in the frame parts.