Users manual for Innowalk Pro 2
Version: 1.06
–
Version date: 06.12.2023
Page
7
of
78
3.
Daily Pre-Check
What is a pre-check?
Pre-check is a check performed to discover wear on important parts.
Types of pre-check:
Daily
: The most important parts are checked daily before use.
Monthly
: Other wear parts are checked for wear once a month.
Why to perform:
To discover wear and replace worn parts before eventual part breakage.
Who to perform:
Trained operators. Only trained operators are allowed to check + operate
the product.
What to perform:
The test-steps are described below.
What to do if error
is discovered:
Contact your Made for Movement representative to agree on
actions/repairs.
Daily Pre-check:
Daily, before use, the following shall be checked by the operator:
1.
Belts
–
Check that all belts and seams are intact, without visible damages, and Velcro locks well.
2.
Back attachment to seat
- Push the back column in all 4 directions and check that the
attachment is tight, and the attachment point is without damages.
Monthly Pre-check:
Once a month the following is to be checked by the operator:
1.
Belts
–
Check that all belts and seams are intact, without visible damages, and Velcro locks well.
2.
Chest and hip support
–
Push, pull and rotate the chest and hip support in all directions. Check
that all parts are tight.
3.
Back attachment to seat
- Push the back column in all 4 directions and check that the
attachment is tight, and the attachment point is without damages.
4.
Guide-strap
–
Check that the guide strings/straps and seams are intact, without visible damages.
5.
Leg support
–
Check that the leg support swing-out function locks into its position.
6.
Electrical system
–
Check that no cables, buttons or electrical parts are damaged.
7.
Covers
–
Check that the covers are without cracks or holes.
8.
Remote control
–
Check that the remote housing is without any cracks or holes and remote cable
is without damages. Press each button for 1. sec to check that all functions work.
9.
Strange sounds
–
Check that there are no dissonance, strange sounds or metal friction sounds in
the electrical or mechanical system.
Contact your Made for Movement representative if errors are discovered to agree on actions/
repairs.
Don’t use the product before this is settled.
For more tips on how to execute the pre-checks, scan the QR code and examine the
Pre-check instructions given.