
Users manual for Innowalk Pro 2
Version: 1.06
–
Version date: 06.12.2023
Page
15
of
78
4.7
Transfer the user out of the Innowalk
Important:
Always loosen the hip belt before lowering the user to a sitting position. This to
prevent the belt from pressing into the stomach during sitting down.
Stop the leg movement
by pressing the “Stop” button on the remote control.
Loosen the hip belt.
P
ush the “down” button
on the remote control until the user is in a sitting position. Hold onto the
guide-strap to control the tension when going from standing to sitting position (the person assisting
the user can put pressure on the guide-strap with his/her foot. Your MFM representative will show
you how). Make sure that the user is secured at the seat while he/she is being released from the
Innowalk. Un-hook the guide-strap from the leg support and release the feet from the foot plates.
Rotate the swivel seat, if used, for easier transfer out. Make sure the seat is in locked position before
the user is transferred. Always pay attention to the users legs when rotating the seat to ensure the
feet move freely and are not tangled or caught. When the seat is rotated out to the desired position,
the seat may be lowered further
if it’s not already at the lowest position. Pay attention to the
users
feet during lowering, and also make sure that the hip belt do not press towards the users
hip/stomach when lowering.
The chest belt and chest support can now be released and turned out to the sides. Support the user
carefully to avoid them from falling. The user is now released from the Innowalk and can be
transferred out of the device either manually or using a hoist system.
Disconnect the plug from the Power supply to the Innowalk when the session is finished.
Important:
Always remember to disconnect the device after use.
Important:
Ensure that the user is completely released from the Innowalk before being
hoisted out of the device. Make sure that the users legs don
’
t get caught in the leg support or other
parts of the Innowalk when being transferred.