Users manual for Innowalk Pro 2
Version: 1.06
–
Version date: 06.12.2023
Page
68
of
78
* Normally most of these parts will last for many years, however the pace of parts being worn down
is highly individual and relates to each users use of the product.
Labels are very seldomly worn out, but for somewhat special cause they are worn out and difficult to
read, these shall be replaced during the annual inspection.
Checklist (paper or digital) for annual inspection shall be used, signed and securely stored by the
Made for Movement representative. Label for executed annual inspection to be applied to the
product (in some markets).
Do not execute maintenance when the product is in use, or the user is in the product.
7.14 Waste handling / recycling
All metal components in the Innowalk can be recycled. Electrical components and print circuit boards
should be delivered to an approved depot or be sent to Made for Movement Group AS.
Covers, metal parts etc., can be handled as normal waste and be recycled at an approved depot.
7.15 Cleaning and disinfection
Innowalk can be washed with a soft cloth, misted in mild soap water. Ordinary household cleaning
products may be used. Do not use high pressure washing or other mechanical hard washing
techniques.
To clean the:
To wash; use:
To disinfect; use:
Metal parts
Soft cloth, misted in mild soap water
Ethanol on cloth
Paddings/belts
Soft cloth, misted in mild soap water
Ethanol on cloth
Innowalk can be disinfected with alcohol-based cleaners. Stronger cleaners should not be used. For
specialized disinfection cleaners, contact Made for Movement for list of existing governmental
approved disinfection agents.
Important:
Innowalk must be washed at least once a week
Important:
Do not use spray water or any other liquids directly to any of the moving parts or
at the electronics.