Users manual for Innowalk Pro 2
Version: 1.06
–
Version date: 06.12.2023
Page
34
of
78
Important:
The cam stop reduces the range of motion of the leg support and may be used to
reduce extension over the knees and avoids over-stretch/hyper-extension of the users knees.
It is important that this is individually adjusted on both the left and right foot plate before
each training session in the Innowalk Pro.
Important:
When needed: remember to fasten Velcro-strap on the knee support
Adjustment of the leg support height:
Unscrew the leg support height knob approximately one turn and simply slide the upper part of the
leg support to the desired position. The two arms will be interlocked when the knob is tightened
again. The value of the leg support height can be read at the front of the steel.
Remember to adjust both leg supports.
Picture 33 - Leg support height adjustment
Important:
The height of the leg support should be individually adjusted for each user. The
height of the leg support should normally be adjusted so the top of the leg support padding is
positioned underneath the users knee.
Read the value for leg
support height here
Knob for adjustment of
leg support height