Users manual for Innowalk Pro 2
Version: 1.06
–
Version date: 06.12.2023
Page
53
of
78
7.8
Extra equipment
7.8.1
Tray
For Innowalk Pro Medium and Large:
A Tray can be provided with your Innowalk Pro as extra equipment. The tray can be swiveled away or
removed when it’s not
used. The tray is fixed to the Innowalk with a tube-bracket attached to the
column.
Picture 45
–
Tray for Innowalk Pro Medium and Large
The tray can be removed by loosening the swing-out knob on the tube clamp, and then by lifting at
the front of the tray on the tray tube. Store the tray in a suitable location when not in use.
Alternatively, the tray can be swiveled away to the side by loosening the swing-out knob on the tube
clamp, then lifting the tray tube slightly up and rotating it outwards.
To adjust the height of the tray, loosen the height adjustment knob, slide the tray up/down to the
desired position and tighten the knob again.
Depth and angle of the tray is adjusted by loosening the adjustment knobs under the tray on the
tube. Adjust to the desired position and tighten the knobs again.
Picture 46
–
Adjustment of tray depth and tilt
The tray shall never be used as a safety feature. Always use the chest and hip belts when using the
Innowalk, also when using the tray. The belts can be loosened to enable more mobility for users that
have good enough trunk and body control, but the belts shall never be taken off during use.
Swing-out knob
Tube clamp
Tray
Tray tube
Tube bracket
Adjustment knobs
tray depth and tilt
Height adjustment knob