Users manual for Innowalk Pro 2
Version: 1.06
–
Version date: 06.12.2023
Page
69
of
78
7.16 Indoor and outdoor transportation
Please refer to chapter 5.9 Transport wheels for details regarding the use of transport wheels. The
transport wheels should be used for indoor and outdoor transportation to ease handling and
movement of the Innowalk. If lifting is still required to get the product into the desired location,
please lift in the frame parts, and always make sure correct lifting techniques and enough manpower
is used to prevent injuries to the handlers as the Innowalk is heavy.
When moving the Innowalk outdoors please make sure that the ground is free of obstacles, on a level
surface, and safe to move without obstacles and dangers. Move the Innowalk slowly and never faster
than the handler easily can stop and hold back the Innowalk. In special cases where the Innowalk is
to be installed in a high floor building without a lift, the Innowalk can be sent out in 2 modules to
ease carrying the modules to the desired floor for assembly. Please contact Made for Movement for
planning and execution of this when necessary.
The Innowalk must be in the lower front tilt position during transport, to prevent the front tilt from
being damaged.
When the Innowalk is transported in a car/truck/trailer or similar, it shall always be securely
attached. Straps shall only be attached to the frame as indicated in Appendix 5. Attaching to other
parts may damage the unit.
Picture 59 - Lifting / strapping areas circled out
Important:
Innowalk must not, under any circumstances, be moved with the user in!
Important:
Please be careful when transporting the Innowalk over obstacles such as door
frames, uneven ground etc. as rough handling over obstacles can damage the transport
wheel solution. Preferably place the transport wheels in parallel to the obstacle as there is
much less chance to damage the wheels is force is applied evenly.
7.17 Chapter not in use
…