made for movement Innowalk Pro 2, User Manual, Page: 29 / 78

Users manual for Innowalk Pro 2
Version: 1.06
– Version date: 06.12.2023 Page 29 of 78
6. Adjustments
The following section presupposes that consultants from Made for Movement or it’s representatives
have trained the clinicians and other person responsible for operating the Innowalk Pro in
accordance with the product training programme available for the Innowalk Pro.
Important: None of the adjustments explained in this chapter can be done by someone that
has not received training by Made for Movement Group AS, its representative or a skilled, trained
person.
Before a new user is going to use the Innowalk Pro for the first time, the user needs to be assessed
by a clinician with clinical responsibility and approved to be a candidate for using the device.
When the user is approved to be a candidate, the user needs to be measured. (see appendix 3).
Transfer the measurements from the user to roughly adjust the Innowalk Pro when the user is sitting
and standing in the device to ensure a good alignment in the device, taking the users limitations such
as, range of motion in angles, knees and hips and lower back, upper body and/or head control,
asymmetries amount others into consideration.
The following adjustments must be fitted to each user:
•
Foot plate position at the ski
•
Foot plates sideways position
•
Leg supports height
•
Positioning of the knee pads in the vertical plane (if applicable)
•
Height of the seat
•
Depth of the seat
•
Position of the backrest
•
Position of the chest support
•
Position of the hip support and belt
•
Position of head support
•
Position of handles for arm movement or tray
•
Level of spasm control
•
Pulley tower tension
•
Foot plates inlay-soles (if needed)
•
Shoulder straps (if needed)
Each of the adjustments will be explained in the following chapter.
All adjustable parts on the Innowalk Pro, except from the arm movement handles and tray, have a
reference scale with numbers. When the Innowalk Pro has been adjusted for a user, and this is the
preferred positioning, read the reference scale-
numbers and add them into the “Personal setting s ”
form (please see form below). Each time the person is using the device, the Innowalk Pro can be
adjusted in accordance to the “Personal setting s ” form before the user is transferred into the
Innowalk Pro.