WINDROWER OPERATION
169469/169470/169471
80
Revision E
k. Use the HEADER TILT switches to release load
on the cylinder (if necessary).
l. Raise the center-link off the header using the
REEL UP switch on the Ground Speed Lever
(GSL).
m. Slowly back windrower away from header, shut off
engine, and remove key from ignition.
n. Attach header transport hitch to header as follows:
1. Position end (G) of the aft section onto front
wheel hook (H).
2. Push down until latch (J) captures the
end (G).
3. Secure latch (J) with clevis pin (K).
4. Remove the L-pin from end (L) of aft section
(if installed).
5. Position end (M) of the forward section into
end (L) of the aft section.
6. Lower forward section into aft section.
7. Fully insert L-pin (N) in upper hole, and turn
pin to lock it. Secure with ring pin (O).
(continued next page)
L
M
AFT SECTION
FORWARD SECTION
G
G
J
K
H
N
O
Q
L
M
HEADER TILT UP
HEADER
TILT DOWN
REEL UP
REEL DOWN
Summary of Contents for M205 2012
Page 1: ...M205 Self Propelled Windrower OPERATOR S MANUAL Part 169469 Rev E 25 ...
Page 11: ...SAFETY 169469 169470 169471 9 Revision E ...
Page 13: ...SAFETY 169469 169470 169471 11 Revision E Safety Sign Locations cont d ...
Page 186: ...MAINTENANCE AND SERVICING 169469 169470 169471 184 Revision E 7 10 13 3 Fuse Box Decal ...