![background image](http://html1.mh-extra.com/html/macdon/m205-2012/m205-2012_operators-manual_685756151.webp)
MAINTENANCE AND SERVICING
169469/169470/169471
149
Revision E
m. Inspect the air intake piping for damage, cracked
hoses, loose clamps, etc. Repair or replace
damaged parts, and tighten loose clamps.
n. If spring type clamps (M) require tightening, use a
gauge as shown.
o. Constant torque type clamps (N) should be
tightened to achieve gap as shown.
p. Clamp (O) should be tightened to 25–40 in·lbf
(2.8 N·m).
q. Close engine compartment hood.
M
HOLD 0.018 in. (0.46 mm) GAUGE BETWEEN
MIDDLE COILS, AND TIGHTEN CLAMP UNTIL
GAUGE IS SNUG. REMOVE GAUGE.
M
0.157 +/-.02 in.
(4 +/- 0.5 mm)
O
N
Summary of Contents for M205 2012
Page 1: ...M205 Self Propelled Windrower OPERATOR S MANUAL Part 169469 Rev E 25 ...
Page 11: ...SAFETY 169469 169470 169471 9 Revision E ...
Page 13: ...SAFETY 169469 169470 169471 11 Revision E Safety Sign Locations cont d ...
Page 186: ...MAINTENANCE AND SERVICING 169469 169470 169471 184 Revision E 7 10 13 3 Fuse Box Decal ...