MAINTENANCE AND SERVICING
169469/169470/169471
161
Revision E
7.8.10 BELTS
DANGER
Stop engine, and remove key from ignition
before leaving Operator’s seat for any reason.
A child or even a pet could engage an idling
machine.
7.8.10.1 Tension
a. The alternator, water pump, and fan belt are
automatically tightened, and manual adjustment is
not required.
b. Tension A/C compressor belt (A) as follows:
1. Shut down engine, and open engine
compartment access hood to lowest position.
See Section 7.4 ENGINE COMPARTMENT
HOOD.
2. Loosen compressor mounting hardware (B).
3. Pry compressor away from engine so that a
force of 8–12 lbf (35–55 N) deflects the
belt (A) 3/16 inch (5 mm) at mid-span.
4. Tighten compressor mounting hardware.
5. Re-check tension, and re-adjust as required.
7.8.10.2 A/C Compressor Belt Replacement
a. Shut down the engine, and open engine
compartment access hood to lowest level. Refer to
illustration opposite.
b. Loosen compressor mounting hardware (B), and
push compressor towards engine to release
tension.
c. Remove belt (A).
d. Install new belt (A) on pulleys.
e. Pry compressor away from engine so that a force
of 8–12 lbf (35–55 N) deflects the belt (A)
3/16 inch (5 mm) at mid-span.
f. Tighten compressor mounting hardware (B).
g. Re-check tension, and re-adjust as required.
7.8.10.3 Fan Belt Replacement
DANGER
Stop engine, and remove key from ignition
before leaving Operator’s seat for any reason.
A child or even a pet could engage an idling
machine.
a. Shut down the engine, and open engine
compartment access hood to highest position.
b. Move both maintenance platforms to rear
(cab-forward) of windrower.
(continued next page)
B
A
Summary of Contents for M205 2012
Page 1: ...M205 Self Propelled Windrower OPERATOR S MANUAL Part 169469 Rev E 25 ...
Page 11: ...SAFETY 169469 169470 169471 9 Revision E ...
Page 13: ...SAFETY 169469 169470 169471 11 Revision E Safety Sign Locations cont d ...
Page 186: ...MAINTENANCE AND SERVICING 169469 169470 169471 184 Revision E 7 10 13 3 Fuse Box Decal ...