![background image](http://html1.mh-extra.com/html/macdon/m205-2012/m205-2012_operators-manual_685756101.webp)
HEADER OPERATION – D SERIES
169469/169470/169471
99
Revision E
2. Locate boot (D) on lift linkage (E), and reinstall
pin (C). Pin may be installed from either side
of boot.
3. Secure pin (A) with hairpin.
4. Repeat for opposite side.
b. Remove hairpin on pins (F), and remove pins from
header legs.
CAUTION
Check to be sure all bystanders have cleared
the area.
c. Start the engine, and activate HEADER DOWN
button on the Ground Speed Lever (GSL) to fully
retract header lift cylinders.
d. Slowly
drive
windrower
forward so that boots (D)
enter header legs (G). Continue to drive slowly
forward until lift linkages contact support plates in
the header legs, and header nudges forward.
e. Check that linkages are properly engaged in
header legs, contacting support plates.
f. Adjust the position of the center-link cylinder with
the REEL UP and REEL DOWN switches, and
HEADER TILT switches on the GSL to position
the hook above the header attachment pin.
(continued next page)
HEADER TILT UP
HEADER
TILT DOWN
REEL UP
REEL DOWN
F
D
G
HEADER UP
HEADER TILT UP
HEADER DOWN
HEADER
TILT DOWN
D
E
Summary of Contents for M205 2012
Page 1: ...M205 Self Propelled Windrower OPERATOR S MANUAL Part 169469 Rev E 25 ...
Page 11: ...SAFETY 169469 169470 169471 9 Revision E ...
Page 13: ...SAFETY 169469 169470 169471 11 Revision E Safety Sign Locations cont d ...
Page 186: ...MAINTENANCE AND SERVICING 169469 169470 169471 184 Revision E 7 10 13 3 Fuse Box Decal ...