MAINTENANCE AND SERVICING
169469/169470/169471
145
Revision E
7.8.3 OIL
LEVEL
Check engine oil level frequently and watch for
any signs of leakage.
NOTE
During the break-in period, a higher than
usual oil consumption should be considered
normal.
Check the oil level as follows:
a. Stop the engine, and remove the key. Wait about
5 minutes.
b. Open engine compartment hood to lowest
position. See Section 7.4 ENGINE
COMPARTMENT HOOD.
c. Remove dipstick by turning it counterclockwise to
unlock, and remove.
d. Wipe clean, reinsert in engine, and remove.
e. Oil level should be between LOW and HIGH
marks.
f. Replace dipstick, and turn it clockwise to lock.
g. Add oil as follows if level is below the LOW mark:
Two U.S. quarts (1.9 liters) will raise the level from
LOW to HIGH.
CAUTION
Do not fill above the HIGH mark.
1.
Remove filler cap by turning it
counterclockwise.
2. Carefully pour the oil. Use SAE 15W-40
Compliant With SAE Specs for API Class SJ
and CH-4 Engine Oil. A funnel is
recommended to avoid spillage.
3. Replace oil filler cap, and turn it clockwise
until snug.
h. Close engine compartment hood.
Summary of Contents for M205 2012
Page 1: ...M205 Self Propelled Windrower OPERATOR S MANUAL Part 169469 Rev E 25 ...
Page 11: ...SAFETY 169469 169470 169471 9 Revision E ...
Page 13: ...SAFETY 169469 169470 169471 11 Revision E Safety Sign Locations cont d ...
Page 186: ...MAINTENANCE AND SERVICING 169469 169470 169471 184 Revision E 7 10 13 3 Fuse Box Decal ...