MAINTENANCE AND SERVICING
169469/169470/169471
189
Revision E
7.11.4.2 Charge
Filter
NOTE
Change hydraulic oil filter after the first
50 hours of operation and every 500 hours
thereafter. Filter part MD #112419 can be
obtained from your Dealer.
a. Stop engine, and remove key.
b. Clean around head of the filter.
c. Unscrew the filter with a filter wrench.
d. Clean the gasket surface of the filter head.
e. Apply a thin film of clean oil to the filter gasket.
f. Screw the new filter onto the mount until the
gasket contacts the filter head.
g. Tighten filter an additional 1/2 turn by hand.
IMPORTANT
Do not use a filter wrench to install oil filter.
Over-tightening can damage gasket and
filter.
7.11.4.3 Return
Filter
NOTE
The return filter is a part of the hydraulics
package required to run a draper or auger
header.
NOTE
Change hydraulic oil filter after the first
50 hours of operation and every 500 hours
thereafter. Filter part MD #112419 can be
obtained from your Dealer.
a. Stop engine, and remove key.
b. Move left cab-forward platform out to maintenance
position.
c. Clean around head of the filter.
d. Unscrew the filter with a filter wrench.
e. Clean the gasket surface of the filter head.
f. Apply a thin film of clean oil to the filter gasket.
g. Screw the new filter onto the mount until the
gasket contacts the filter head.
h. Tighten filter an additional 1/2 turn by hand.
IMPORTANT
Do not use a filter wrench to install oil filter.
Over-tightening can damage gasket and
filter.
Summary of Contents for M205 2012
Page 1: ...M205 Self Propelled Windrower OPERATOR S MANUAL Part 169469 Rev E 25 ...
Page 11: ...SAFETY 169469 169470 169471 9 Revision E ...
Page 13: ...SAFETY 169469 169470 169471 11 Revision E Safety Sign Locations cont d ...
Page 186: ...MAINTENANCE AND SERVICING 169469 169470 169471 184 Revision E 7 10 13 3 Fuse Box Decal ...