MAINTENANCE AND SERVICING
169469/169470/169471
188
Revision E
7.11.4 HYDRAULIC OIL FILTERS
Change hydraulic oil filters as follows:
DANGER
Stop engine, and remove key from ignition
before leaving Operator’s seat for any reason.
A child or even a pet could engage an idling
machine.
7.11.4.1 Lift
Filter
NOTE
Change filter when changing hydraulic oil.
Filter part MD #112419 can be obtained
from your Dealer.
IMPORTANT
If filter needs to be changed at any other
time, a vacuum must be applied to the
supply tank to prevent the oil from running
out of the filter head when the filter is
removed.
a. Stop engine, and remove key.
b. Open engine compartment hood to highest
position.
c. Clean around head of the filter.
d. Unscrew the filter with a filter wrench.
e. Clean the gasket surface of the filter head.
f. Apply a thin film of clean oil to the filter gasket.
g. Screw the new filter onto the mount until the
gasket contacts the filter head.
h. Tighten filter an additional 1/2 turn by hand.
IMPORTANT
Do not use a filter wrench to install oil filter.
Over-tightening can damage gasket and
filter.
Summary of Contents for M205 2012
Page 1: ...M205 Self Propelled Windrower OPERATOR S MANUAL Part 169469 Rev E 25 ...
Page 11: ...SAFETY 169469 169470 169471 9 Revision E ...
Page 13: ...SAFETY 169469 169470 169471 11 Revision E Safety Sign Locations cont d ...
Page 186: ...MAINTENANCE AND SERVICING 169469 169470 169471 184 Revision E 7 10 13 3 Fuse Box Decal ...