MacDon M205 2012, Operator'S Manual

Page: 117 / 230

HEADER OPERATION – A SERIES
169469/169470/169471
115
Revision E
6.6.3 AUGER SPEED
CAUTION
Check to be sure all bystanders have cleared
the area.
6.6.3.1 A40-D Headers
On A40-D double knife headers, the auger speed
is dependent to reel speed. Adjust auger and reel
speed as follows:
NOTE
Auger speed is displayed on Cab Display
Module (CDM) as 4.7. This value is
constant and cannot be changed even if
auger speed is adjusted through reel circuit.
To adjust auger speed, refer to Section 6.6.4 Reel
Speed.
6.6.3.2 A30-D Headers
On A30 Series auger headers, the auger speed is
fixed to the knife speed.
NOTE
The auger speed can be independently
changed from the knife speed by changing
the drive sprocket. Refer to A30-S, A30-D
and
A40-D Self Propelled Windrower
Headers Operator’s Manual.
Display the auger speed as follows:
DISPLAY
SELECTOR
DISPLAY
HEADER INDEX
ENGAGE HEADER
HEADER INDEX
SWITCH - OFF
ON GSL PRESS SELECTOR BUTTON
OR SELECT SWITCH ON CDM FOR
##.# AUGER SPEED
ENGAGE HEADER
ON CDM PRESS
FAST OR SLOW
DISPLAY SHOWS
##.# AUGER SPEED
DONE
SPEED
O.K.?
NO
YES
PRESS DISPLAY SELECTOR
FOR ##.# AUGER SPEED
HEADER INDEX
SWITCH - OFF
##.# = 4.7 – 9.9
4.7 = 150 rpm
* 9.9 = 320 rpm
* Auger Speed Not To Exceed 320 rpm.