MAINTENANCE AND SERVICING
169469/169470/169471
174
Revision E
7.10.2 HEADLIGHTS: ENGINE-FORWARD
DANGER
Stop engine, and remove key from ignition
before leaving Operator’s seat for any reason.
A child or even a pet could engage an idling
machine.
NOTE
Header should be attached and raised to
maintain proper windrower stance.
7.10.2.1 Alignment
a. Position windrower on level ground in front of a
vertical surface in accordance with the illustration.
b. Shut down engine, and remove the key.
c. Turn headlights (A) ON, and switch to
low-beam.
d. Align the headlights to the following specifications
by turning adjusting screws (B).
Adjustments are for low-beam.
Light beams laterally centered on the direction
of travel line from the headlights (i.e. not
skewed left or right).
Upper limit of the beam not higher than
49-3/4 inches (1,263 mm) above ground at a
distance of 25 ft. (7.5 m) from the headlight.
7.10.2.2 Bulb
Replacement
a. Remove the two screws (C), and remove
headlight assembly from hood.
b. Pull wiring harness connector off the headlight
assembly, and remove rubber insulator boot (D).
(continued next page)
49.75 in.
(1263 mm)
maximum
C
D
B
A
Summary of Contents for M205 2012
Page 1: ...M205 Self Propelled Windrower OPERATOR S MANUAL Part 169469 Rev E 25 ...
Page 11: ...SAFETY 169469 169470 169471 9 Revision E ...
Page 13: ...SAFETY 169469 169470 169471 11 Revision E Safety Sign Locations cont d ...
Page 186: ...MAINTENANCE AND SERVICING 169469 169470 169471 184 Revision E 7 10 13 3 Fuse Box Decal ...