MacDon M205 2012, Operator'S Manual, Page: 161 / 230

MAINTENANCE AND SERVICING
169469/169470/169471
159
Revision E
7.8.8.2 Changing Lubricant
Change gearbox lubricant after the first 50 hours
and then at 500 hours as follows:
NOTE
The engine should be warm prior to
changing the oil.
a. Stop the engine, and remove the key.
b. Place a 1 U.S. gallon (4 liters) drain pan under the
gearbox.
c. Remove drain plug (C), and allow the oil to
completely finish draining.
d. Install the drain plug (C), and remove the check
plug (A).
e. Unscrew breather cap (B), and add lubricant. The
gearbox will require 2.2 U.S. quarts (2.1 liters).
Add sufficient lubricant until it slightly runs out of
hole (A). Use SAE 75W-90 API Service Class
GL-5, Fully Synthetic Transmission Lubricant.
SAEJ2360 preferred.
f. Install plugs (A) and (C).
g. Operate the engine at low idle, and check for
leaks at the check plug and drain plug.
A
C
B