MA lighting Dot 2, User Manual

Page: 216 / 494

Cue 2 Update 30 % 30 % 30 %
Cue 3 100 % 50 % 25 %
Cue list Fixture 1 Fixture 2 Fixture 3
7.14. Color Preset Type View
To go to the
Color Preset Type View
, tap Color in the Preset Type Bar .
- or -
Press and hold and press 4 , for preset type 4 (= Color).
The color preset type view is only active if the selected fixture has a color attributes.
The color preset type view has three default tabs: The Picker View , the Fader View , Swatchbook View.
Depending on the fixture type additional
Raw Color Views
.
Important:
The color picker and the color sliders works absolute. A tap on the color picker or the color slider sets a
new color value and does not follow the already set color values.
The respective encoders works relative to the already set color values.
To open the color effects view at screen 1, tap at in the title bar.
If an effect is running on a selected fixture, the color preset type view change into an effect mode and get a blue
effect mode title bar .
Picker View
216