You can do the same with any of your available Preset types. Remember that you can only store Dimmer values in a
Dimmer Preset. The same is valid for each of the different Preset Types - except the All presets.
Try to have dimmer and color values in your programmer. Then tap All on the menu on the right screen. Press
Store
and then one of the All Presets. Now you have stored a preset that have both dimmer and color values.
Notice that tapping the All button opens the All preset pool on screen 1. You can also open this All preset pool by
pressing
+
0
.
Naming presets
If you start to type on an external keyboard directly after storing a preset, then you are labeling the preset. You might
also notice a label pop-up when you store a preset. Tapping this will open the naming window. If you need to label
a preset long after it's stored then you can press the Label key and then the preset you want to label. This also
opens the Naming window.
The dot2 will try to name the preset based on it's best guess. This doesn't work if there's no definite value. An
example is position presets. The dot2 simply doesn't know what the fixtures are pointed at, so auto-naming them
doesn't make sense.
Call/Use/Select a Preset
If you store a preset, then you get the link to the preset directly in your programmer. This allows you to store a cue
directly afterwards and have the preset in the cue.
If you need to use a preset, after you have created them, then you have the following options. If you don't have any
fixture selected, then you can tap the preset you want to use. The first tap selects all the fixtures that can use the
preset. You'll need to tap it again to actually get the preset in your programmer.
If you have a selection of fixture and you tap a preset then it's only the fixtures that can actually use the preset that
gets the preset in the programmer.
Once you have the preset values in your programmer, then you can store a cue, a new preset or take the values out
of your programmer again.
Update a preset
If you need to update the values in the preset then you need to select the fixtures you want to update and give them
the value you want, then press the
Update
key and tap the preset you want to update.
This is the same as pressing
Store
followed by the preset you want to update and then choose Merge in the
.
Now the values in your preset have changed. If you use the preset in a cue somewhere then this cue will now look
different - it uses the updated values.
If you have used a preset in a cue and you add new values (not changing the existing ones) or add more fixtures to
the preset, then this new information isn't added in your previous saved cue. Cues only looks for the values that was
originally stored in the cue.
Delete a preset
114
