MA lighting Dot 2, User Manual

Page: 116 / 494

Figure 1: Choose store method.
There are four options here:
Merge
- This option will add the values to the existing values in the cue.
Remove
- This will remove the existing values of the same type that you currently have active in your programmer.
Overwrite
- This will delete the current content of the cue and add your active value to the cue.
Create Second Cue - This option is only available when you have a cue list with only one cue. Pressing this will
add your currently active values to a new cue number 2.
If you want to store a specific cue number then you can use a more precise command input. E.g. you want to store
cue number 5. Then you can use the follow key presses:
Store Cue 5 Please . You can even add a cue timing
while storing it. E.g. you want to store cue number 5 with a fade time of 3 seconds. To do this press the following
keys:
Store Cue 5 Time (= Fade command) 3 Please .
If you don't specify the cue timing when you store the cue, then it uses the default times set in the Time Defaults
window . You can set these by pressing the Time key (with an empty command line). It could look like this:
116