have the option to tap New Session and begin you own new session.
You can add Consoles, onPCs, 3D and DMX Nodes into your session by having a session running and then in the
Sessions view under "Connected Devices" you can tap the Add button. This will give you a list of all available
devices in your network.
When you tap each section then you can see the different devices in each section. If the console or onPC have a
bright green background, then it's the device you are sitting in front. A dark green background is a device that's a
part of your session. Red backgrounds are devices that should be in your networks but is missing.
You can remove a device from your network by selecting it and press Remove .
As written above: The limit for each session is five dot2 consoles/onPC's, five dot2 3D visualizers and 10 dot2 Node4
(1K)s.
You can set what universes a connected node or console outputs on each XLR port. You can change this by
selecting the node/console you want to change and then the cell below each of the XLRs. Tap the right encoder
and write the universe number you want it to output - you can select 1 through 8.
The show remembers what different devices it should connect to and their DMX universe assignment.
Last chapter coming up!
3.24. Getting Started Guide - Happy programming
79