LS ELECTRIC H100 0008-2(PLUS), Manual

Page: 100 / 239

Table of Functions
74
4 Table of Functions
This chapter lists all the function settings for the H100+ series inverter. Use the references
listed in this document to set the parameters. If an entered set value is out of range, the
messages that will be displayed on the keypad are also provided in this chapter. In these
situations, the [ENT] key will not operate to program the inverter.
4.1 Drive Group (DRV)
Data in the following table will be displayed only when the related code has been selected.
*O: Write-
enabled during operation, Δ: Write-enabled when operation stops, X: Write-
disabled
Code
(Comm.
Address)
Name
LCD
Display
Setting Range Initial value Property* Ref.
DRV-00
(-)
Jump Code
Jump
Code
1
–99
9 O
DRV-01
(0h1101)
Target
frequency Cmd
Frequency 0.00, Low Freq
– High
Freq
0.00 O
DRV-02
(0h1102)
Keypad run
direction Keypad
Run Dir
0 Reverse
1 O
1 Forward
DRV-03
(0h1103)
Acceleration
time
Acc Time 0.0
–600.0 (sec)
20.0
0.75~
90kW
O 60.0
110~
250kW
100.0
315~
500kW
DRV-04
(0h1104)
Deceleration
time
Dec Time 0.0
–600.0 (sec)
30.0
0.75~
90kW
O 90.0
110~
250kW
150.0
315~
500kW
DRV-05
(0h1105)
HAND-OFF-
AUTO Key
Lock
KPD H.O.A
Lock
0 Locked
2: OFF key
Enable
Δ
1 During Run
2 OFF key Enable