LS ELECTRIC H100 0008-2(PLUS), Manual

Page: 12 / 239

Quick Start Reference
Q
xii
EZ Start
This Step provides details on EZ start steps.
Step Parameter Description
1 CNF-43: Select a macro.
0. Basic (Default)
1. Pressure Ctrl
2. Lead-Lag
2 DRV 32: Regional Set
0. US
1. International
2. KR
3 AP3-01 Now Date Set Date
4 AP3-02 Now Time Set Time
5 DRV-14 Motor Capacity Set HP rating
6 BAS-10 60/50 Hz Sel Set motor rated frequency
7 BAS-13 Rated Curr Set motor rated current
8 BAS-15 Rated Volt Set motor rated voltage
9 BAS-11 Pole Number Set motor pole number.
10 BAS-19 AC Input Volt Set input voltage.
11 DRV-06 Cmd Source Cmd Source: Set command source.
12 DRV-07 Freq Ref Src Set Frequency Reference source.
13 DRV-03 Accel Time Sets the time to accelerate from 0 to maximum frequency
14 DRV-04 Decel Time Sets the time to decelerate from maximum frequency to 0.
15 ADV-08 Stop mode
Stopping Method
0. Decel stop
1. DC-Brake
2. Coast stop
4. Power Braking
16 ADV-09 Run Prevent
Choose a direction to prevent
1. Forward Prev
2. Reverse Prev
17 PRT-05 Phase loss check
When open-phase protection is operating, input and output
configurations are displayed differently. When the LCD segment
is On, the corresponding
bit is set to ‘Off’.
Setting
Function
Bit 1 Bit 0
√
Output open-phase protection
√
Input open-phase protection