LS ELECTRIC H100 0008-2(PLUS), Manual

Page: 83 / 239

Perform Basic Operations
57
Parameter Setting Mode
The following table lists the functions groups under Parameter mode.
Function Group Name Keypad Display Description
Drive DRV
Configures basic operation parameters. These
include jog operation, motor capacity evaluation, and
torque boost.
Basic BAS
Configures basic operation parameters. These
parameters include motor parameters and multi-step
frequency parameters.
Advanced ADV
Configures acceleration or deceleration patterns,
frequency limits, energy saving features, and,
regeneration prevention features.
Control CON
Configures the features related to speed search and
KEB (kinetic energy buffering).
Input Terminal IN
Configures input terminal
–related features, including
digital multi
–functional inputs and analog inputs.
Output Terminal OUT
Configures output terminal
–related features,
including digital multi
–functional outputs and analog
outputs.
Communication COM
Configures the USB-related features and
communication features for the RS-485, Modbus-
RTU, LS Bus, Metasys N2, and BACnet. Optional
communication module related features may be
configured as well, if one is installed.
PID process PID Configures the PID control-related features.
Application 1 AP1
Configures the Sleep Boost, SoftFill, and Multiple
motor control (MMC) features related to the PID
control.
Application 2 AP2
Configures the HVAC features by setting the features
such as load tuning, pump cleaning, and pay back
counter.
Application 3 AP3 Configures the time event-related features.
Application 4 AP4
Configures the time flow monitoring and PI aux
control features.
Protection PRT Configures motor and inverter protection features.