Lexmark 12N0003 - C 910 Color Laser Printer User Reference Manual Download Page 45

Page: 45 / 323

Press the paper tray button

The paper tray lowers to let you load up another 500 sheets of paper.

Note: If there is only a partial stack of paper in the tray, the paper low sensor will not allow

the tray to go down. Add more paper to lower the tray.

Place the paper against the paper guides with the print side up.

Repeat step 8 and step 9 until you have filled the tray or loaded the desired quantity.

Close the top cover.

Make sure the high capacity feeder is pushed completely against the printer.

Summary of Contents for 12N0003 - C 910 Color Laser Printer




































































































































































































































































































































Search results

Summary of Contents for 12N0003 - C 910 Color Laser Printer

Reviews:

Related manuals for 12N0003 - C 910 Color Laser Printer

Brands by name

Popular brands

Lexmark 12N0003 - C 910 Color Laser Printer, User Reference Manual

Search results

Summary of Contents for 12N0003 - C 910 Color Laser Printer

Reviews:

Related manuals for 12N0003 - C 910 Color Laser Printer

Brands by name

Popular brands