50
9
Select the paper source, size, and type from your software application and select paper size
and type from the operator panel.
a
Make sure the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size
and MP Feeder Type) are set to the correct value for the print media you are loading. (See
Paper Size
and
Paper Type
for detailed information about these settings.)
b
Press
Go
to return to Ready.
Note: Software settings may override operator panel settings.
Closing the multipurpose feeder
1
Remove print media from the multipurpose feeder.
2
If necessary, push the extended tray in to collapse the multipurpose feeder to its short-length
position.
3
Push down the bottom plate until it locks into place.
Summary of Contents for 12N0003 - C 910 Color Laser Printer
