Lexmark 12N0003 - C 910 Color Laser Printer User Reference Manual Download Page 107

Page: 107 / 323

105

Removing a toner cartridge

Note: If you need instructions on how to open the top cover, see

Opening the top cover

ARNING

Do not touch, drop, or place anything on the transfer belt. Touching the surface of
the transfer belt or placing items on it may cause damage.

Complete the steps to open the top cover.

Note: The toner can soil clothing. Do not clean clothing soiled with toner in hot water; this

permanently adheres the toner to the clothing. Use cold water to remove toner.

Pull the waste toner arm away from the photodeveloper.

Transfer belt

Summary of Contents for 12N0003 - C 910 Color Laser Printer




































































































































































































































































































































Search results

Summary of Contents for 12N0003 - C 910 Color Laser Printer

Reviews:

Related manuals for 12N0003 - C 910 Color Laser Printer

Brands by name

Popular brands

Lexmark 12N0003 - C 910 Color Laser Printer, User Reference Manual

Search results

Summary of Contents for 12N0003 - C 910 Color Laser Printer

Reviews:

Related manuals for 12N0003 - C 910 Color Laser Printer

Brands by name

Popular brands