Lexmark 12N0003 - C 910 Color Laser Printer User Reference Manual Download Page 61

Page: 61 / 323

Press Menu until you see

Custom Type 1

, and then press Select.

Press Menu until you see the type of media you loaded in the heavy media tray, and then
press Select.

Press Go.

The printer returns to the

Ready

state.

Exchanging tray 1

Pull tray 1 out until it stops.

Lift the front of tray 1 and pull the tray forward.

Note: You only need to lift the tray high enough for the tray stop to move over the slide

stop.

Tray stop

Slide stop

Summary of Contents for 12N0003 - C 910 Color Laser Printer




































































































































































































































































































































Search results

Summary of Contents for 12N0003 - C 910 Color Laser Printer

Reviews:

Related manuals for 12N0003 - C 910 Color Laser Printer

Brands by name

Popular brands

Lexmark 12N0003 - C 910 Color Laser Printer, User Reference Manual

Search results

Summary of Contents for 12N0003 - C 910 Color Laser Printer

Reviews:

Related manuals for 12N0003 - C 910 Color Laser Printer

Brands by name

Popular brands