Lexmark 12N0003 - C 910 Color Laser Printer User Reference Manual Download Page 89

Page: 89 / 323

CAUTION:

The oil coating roll may be hot! Allow the oil coating roll to cool before touching.

Pull up on the locking tab to unlock the oil coating roll.

Slide out the oil coating roll.

Hold the oil coating roll by the top, as indicated by the dark areas in the illustration.

Note: The underside of the oil coating roll may be covered with oil. If you are not ready to

slide the coating roll into the fuser immediately, place the coating roll on a sheet of
plastic or other protective material to prevent stains.

Locking tab

Oil coating
roll

Hold here

Summary of Contents for 12N0003 - C 910 Color Laser Printer




































































































































































































































































































































Search results

Summary of Contents for 12N0003 - C 910 Color Laser Printer

Reviews:

Related manuals for 12N0003 - C 910 Color Laser Printer

Brands by name

Popular brands

Lexmark 12N0003 - C 910 Color Laser Printer, User Reference Manual

Search results

Summary of Contents for 12N0003 - C 910 Color Laser Printer

Reviews:

Related manuals for 12N0003 - C 910 Color Laser Printer

Brands by name

Popular brands