Lexmark 12N0003 - C 910 Color Laser Printer User Reference Manual Download Page 62

Page: 62 / 323

Lower the front of the tray and pull the tray from the drawer slides.

Align the rollers on the side of the paper tray with slots on the left and right drawer slides.

Place the drawer rollers into the drawer slides and slide the drawer in until it stops.

Note: If the slides move when you are installing the tray, you can hold one slide while you

insert the drawer, and then pull the other slide out and over the drawer roller until it
stops.

Lift the front of the tray.

Summary of Contents for 12N0003 - C 910 Color Laser Printer




































































































































































































































































































































Search results

Summary of Contents for 12N0003 - C 910 Color Laser Printer

Reviews:

Related manuals for 12N0003 - C 910 Color Laser Printer

Brands by name

Popular brands

Lexmark 12N0003 - C 910 Color Laser Printer, User Reference Manual

Search results

Summary of Contents for 12N0003 - C 910 Color Laser Printer

Reviews:

Related manuals for 12N0003 - C 910 Color Laser Printer

Brands by name

Popular brands