Lenovo ThinkStation P330, User Manual

Page: 90 / 134

d. Align the four holes in the rear of the type-1 storage-drive cage with the corresponding hooks in the
drive bay assembly. Then slide the type-1 storage-drive cage upward until it snaps into position.
Reinstall the screw to secure the type-1 storage-drive cage.
Figure 99. Installing the type-1 storage-drive cage
e. Connect the signal cable and the power cable to the new storage drive.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 89.
Type-2 storage-drive cage
Attention: Do not open your computer or attempt any repair before reading and understanding the
Appendix A “Important safety information” on page 97.
Some computer models come with a type-2 storage-drive cage for installing or replacing a 2.5-inch storage
drive.
To replace the 2.5-inch storage drive, do the following:
1. Prepare your computer. See “Preparing your computer” on page 24.
2. Locate the type-2 storage-drive cage.
3. To remove a 2.5-inch storage drive from the type-2 storage-drive cage, do the following:
a. Disconnect the signal cable and the power cable from the 2.5-inch storage drive.
84
P330 User Guide