Lenovo ThinkStation P330, User Manual

Page: 84 / 134

c. Align the four holes in the rear of the type-1 storage-drive cage with the corresponding hooks in the
drive bay assembly. Then slide the type-1 storage-drive cage upward until it snaps into position.
Reinstall the screw to secure the type-1 storage-drive cage.
Figure 91. Installing the type-1 storage-drive cage
d. Connect the signal cable and the power cable to the new storage drive.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 89.
2.5-inch storage drive
To remove or install a 2.5-inch storage drive with a 2.5-inch to 3.5-inch storage-drive converter (hereafter
referred to as storage-drive converter), do the following:
1. Prepare your computer. See “Preparing your computer” on page 24.
2. Locate the type-1 storage-drive cage.
3. To remove a 2.5-inch storage drive with a storage-drive converter in the type-1 storage-drive cage, do
the following:
a. Disconnect the signal cable and the power cable from the storage drive.
78
P330 User Guide