Lenovo ThinkStation P330 User Manual Download Page 15

Page: 15 / 134

Chapter 2. Get started with your computer

Get started with Ubuntu Desktop

Learn the basics of Ubuntu and start working with it right away. For more information about Ubuntu, see the
Ubuntu documentation site at:

https://help.ubuntu.com/lts/ubuntu-help/index.html

The Gnome desktop is installed by default and is designed to be simple and easy to use. Details on using
Gnome are available by launching the Help application or online at

https://help.gnome.org/users/

Launch an app

• Press the Super key (with the Windows logo) or open the Activities menu on the top left and type in the

name of the application you want to launch.

• Click the

Show Applications

button on the lower left, and select the application you want to launch.

Launch settings

Open the system menu from the top-right corner and click

Settings

Connect to networks

Your computer helps you connect to the world through a wired or wireless network.

Connect to the wired Ethernet

Connect your computer to a local network through the Ethernet connector on your computer with an
Ethernet cable.

Summary of Contents for ThinkStation P330







































































































































Search results

Summary of Contents for ThinkStation P330

Reviews:

Related manuals for ThinkStation P330

Brands by name

Popular brands

Lenovo ThinkStation P330, User Manual

Search results

Summary of Contents for ThinkStation P330

Reviews:

Related manuals for ThinkStation P330

Brands by name

Popular brands