Lenovo ThinkStation P330, User Manual

Page: 42 / 134

d. Install the new card into the appropriate slot on the system board.
Note: If you are installing a PCIe x16 graphics card, ensure that the memory-slot retaining clips are
closed before you install the card to avoid any interference during the installation.
Figure 24. Installing a new full-length PCIe card
e. Rotate the PCIe card retainer to the closed position.
Figure 25. Rotating the PCIe card retainer
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 89.
M.2 solid-state drive
Attention: Do not open your computer or attempt any repair before reading and understanding the
Appendix A “Important safety information” on page 97.
The instructions on how to install or replace a M.2 solid-state drive also apply to the Intel Optane memory.
Before replacing the Intel Optane memory, ensure that you disable the Intel Optane memory from the Intel
Rapid Storage Technology (Intel RST) Console. Otherwise, all data on the storage drive will be lost. For more
information, see instructions on
https://www.intel.com/content/www/us/en/support/articles/000023989/
memory-and-storage/intel-optane-memory.html
.
36
P330 User Guide