Lenovo ThinkStation P330 User Manual Download Page 27

Page: 27 / 134

Change BIOS settings before installing a new operating system

BIOS settings vary by operating system. Change the BIOS settings before installing a new operating system.

To change the BIOS settings:

1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1.

2. From the main interface, select

Security

➙

Secure Boot

and press Enter.

3. Depending on the operating system to be installed, do one of the following:

• To install the Windows 10 (64-bit) and many Linux operating systems, select

Enabled

for

Secure

Boot

• To install an operating system that does not support secure boot, select

Disabled

for

Secure Boot

4. Press F10 or Fn+F10 to save the changes and exit.

Update UEFI BIOS

When you install a new program, device driver, or hardware component, you might need to update UEFI
BIOS. You can update the BIOS from your operating system or a flash update disc (supported only on
selected models).

Download and install the latest UEFI BIOS update package by one of the following methods:

• Using the built-in software update service:

Ubuntu software update will check the LVFS site for any firmware updates and notify you when updates
are available.

• From the Lenovo Support Web site:

1. Go to

https://pcsupport.lenovo.com

2. Download the flash BIOS update driver for the operating system version or the ISO image version

(used to create a flash update disc). Then, download the installation instructions for the flash BIOS
update driver you have downloaded.

3. Print the installation instructions and follow the instructions to update the BIOS.

Chapter 5

UEFI BIOS

Summary of Contents for ThinkStation P330







































































































































Search results

Summary of Contents for ThinkStation P330

Reviews:

Related manuals for ThinkStation P330

Brands by name

Popular brands

Lenovo ThinkStation P330, User Manual

Search results

Summary of Contents for ThinkStation P330

Reviews:

Related manuals for ThinkStation P330

Brands by name

Popular brands