Lenovo ThinkStation P330, User Manual

Page: 64 / 134

7. Pivot the rear cover of the enclosure inward until you hear a click. The rear cover is secured in place.
Figure 64. Pivoting the rear cover inward
8. Connect the signal cable and the power cable to the storage drive.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 89.
2.5-inch storage drive
To remove or install a 2.5-inch storage drive with a 2.5-inch to 3.5-inch storage-drive converter (hereafter
referred to as storage-drive converter), do the following:
1. Prepare your computer. See “Preparing your computer” on page 24.
2. Locate the flex bay. See “Internal storage drives” on page 5.
3. Slide the enclosure out of the chassis. See “Device in the flex bay” on page 45.
4. Pinch the two clips toward each other as shown to open the rear cover of the enclosure.
Figure 65. Opening the enclosure from the rear
58
P330 User Guide