Lenovo ThinkStation P330 User Manual Download Page 10 | Manualshive

Page: 10 / 134

background image

DisplayPort connector

Use this connector to attach a high-performance monitor, a direct-drive monitor, or other compatible
devices.

Mini DisplayPort connector

Use this connector to attach a high-performance monitor, a direct-drive monitor, or other compatible
devices. The Mini DisplayPort connector is a miniaturized version of a DisplayPort connector.

1

Audio line-out connector

The audio line-out connector is used to send audio signals from the computer to external devices, such as
headphones.

2

Serial connector

Use this connector to attach an external modem, a serial printer, or other devices that use a 9-pin serial
connector.

3

DisplayPort connectors (2)

Use this connector to attach a high-performance monitor, a direct-drive monitor, or other compatible
devices.

4

DisplayPort connector or HDMI connector

(available on some models)

•

DisplayPort connector

Use this connector to attach a high-performance monitor, a direct-drive monitor, or other compatible
devices.

•

HDMI connector

The High-Definition Multimedia Interface (HDMI) connector is a digital audio and video interface that can
connect a compatible digital audio device or video monitor, such as a DVD player or a high-definition
digital television (HDTV).

5

USB 3.1 connector Gen 1

Connect USB-compatible devices, such as a USB keyboard, a USB mouse, a USB storage device, or a USB
printer. This connector supports the smart power on feature. When you connect a supported keyboard to
this connector, you can turn on the computer or wake it up from hibernation mode by pressing Alt+P on the
keyboard. You can enable or disable the smart power on feature from the Setup Utility program.

6

USB 3.1 connector Gen 1

Connect USB-compatible devices, such as a USB keyboard, a USB mouse, a USB storage device, or a USB
printer.

7

USB 2.0 connectors (2)

Use this connector to attach a USB-compatible device, such as a USB keyboard, mouse, storage drive, or
printer.

8

Ethernet connector

Connect an Ethernet cable for a local area network (LAN).

4

P330 User Guide

«
...
8
9
10
11
12
...
»

Summary of Contents for ThinkStation P330







































































































































Reviews:

No comments

Related manuals for ThinkStation P330

Brand: IBM Pages: 142

Brand: Metacentre Pages: 8

Brand: IBASE Technology Pages: 80

Brand: IBM Pages: 314

Brand: Intel Pages: 2

Brand: Genesis Pages: 14

Brand: dynabook Pages: 124

Brand: AXIOMTEK Pages: 54

Brand: Moxa Technologies Pages: 7

Brand: ClearCube Pages: 4

Brand: B.A.C. Pages: 8

Brand: IEI Technology Pages: 107

Brand: Nexcom Pages: 71

Brand: Nexcom Pages: 96

Brand: Nexcom Pages: 108

Brand: IEI Technology Pages: 110

TANK-XM810 Series

Brand: IEI Technology Pages: 132

Prima XPC Barebone SX38P2 Pro

Brand: Shuttle Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands