manualshive.com logo in svg

Lenovo ThinkStation P330, User Manual

The Lenovo ThinkStation P330, a powerful workstation, ensures optimal performance in demanding environments. Setting up this exceptional product is a breeze with the comprehensive Setup Manual. Easily accessible on our manualshive.com, download this manual for free and unleash the full potential of your ThinkStation P330 workstation.

Share
Download
background image

Disposing of battery packs from Lenovo products

Your Lenovo device might contain a lithium-ion battery pack or a nickel metal hydride battery pack. You can 
find details on the battery pack in the product documentation. If you need to dispose of a battery pack, 
insulate it with vinyl tape, contact Lenovo sales, service, or your place of purchase, or a waste-disposal 
operator, and follow their instructions. You also can refer to the instructions provided in the user guide for 
your product.

For proper collection and treatment, go to: 

https://www.lenovo.com/lenovo/environment

Recycling information for mainland China

Battery recycling information for Taiwan

Restriction of Hazardous Substances (RoHS) Directive of countries and 
regions

The latest environmental information about Lenovo products is available at: 

https://www.lenovo.com/ecodeclaration

European Union RoHS

This Lenovo product, with included parts (cables, cords, and so on) meets the requirements of Directive 
2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic 
equipment ("RoHS recast" or "RoHS 2").

For more information about Lenovo worldwide compliance on RoHS, go to: 

https://www.lenovo.com/rohs-communication

Turkish WEEE / RoHS

Ukraine RoHS

Appendix D. Compliance and TCO Certified information

119

Summary of Contents for ThinkStation P330







































































































































Reviews:

No comments

Related manuals for ThinkStation P330

IBM Personal Computer Manual To Operations preview
Personal Computer
Brand: IBM Pages: 318
Acewell ACE-6000 Series User Manual preview
ACE-6000 Series
Brand: Acewell Pages: 2
Bull NovaScale T840 User Manual preview
NovaScale T840
Brand: Bull Pages: 302
Sun Microsystems Sun-1 Reference Manual preview
Sun-1
Brand: Sun Microsystems Pages: 92
E-Medic Silence TP 1 User Manual preview
Silence TP 1
Brand: E-Medic Pages: 31
Gigabyte BRIX GB-BACE-3150 Quick Start Manual preview
BRIX GB-BACE-3150
Brand: Gigabyte Pages: 2
Beckhoff CX52 0 Series Manual preview
CX52 0 Series
Brand: Beckhoff Pages: 79
Vivo CART-V06A Instruction Manual preview
CART-V06A
Brand: Vivo Pages: 12
Uplift Desk 3-Leg Desk Assembly Instructions Manual preview
3-Leg Desk
Brand: Uplift Desk Pages: 12
Lenovo 7057 (Spanish) Manual preview
7057
Brand: Lenovo Pages: 50
Lenovo 7052C9U Brochure & Specs preview
7052C9U
Brand: Lenovo Pages: 5
Lenovo 6179B1U User Manual preview
6179B1U
Brand: Lenovo Pages: 58
Lenovo 7390 User Manual preview
7390
Brand: Lenovo Pages: 90
Lenovo 6300 User Manual preview
6300
Brand: Lenovo Pages: 51
Lenovo 6075BW3 User Manual preview
6075BW3
Brand: Lenovo Pages: 82
Lenovo 6138A1U User Manual preview
6138A1U
Brand: Lenovo Pages: 92
Lenovo 7061 Hardware Installation And Replacement Manual preview
7061
Brand: Lenovo Pages: 130
Lenovo 6136A1U User Manual preview
6136A1U
Brand: Lenovo Pages: 76

Brands by name

Popular brands

Load more brands