Lenovo ThinkStation P330 User Manual Download Page 3

Page: 3 / 134

Contents

About this documentation . . . . . . . . iii

Chapter 1. Meet your computer . . . . . 1

Front view . . . . . . . . . . . . . . . . . . 1
Rear view . . . . . . . . . . . . . . . . . . 2
Statement on USB transfer rate

. . . . . . . . . 5

Internal storage drives . . . . . . . . . . . . . 5

Chapter 2. Get started with your
computer . . . . . . . . . . . . . . . . . 9

Get started with Ubuntu Desktop . . . . . . . . . 9
Connect to networks . . . . . . . . . . . . . . 9

Connect to the wired Ethernet . . . . . . . . 9
Connect to Wi-Fi networks (for selected
models) . . . . . . . . . . . . . . . . 10

Use multimedia . . . . . . . . . . . . . . . 10

Use audio . . . . . . . . . . . . . . . 10
Connect to an external display . . . . . . . 10

Chapter 3. Explore your computer . . 13

Manage power . . . . . . . . . . . . . . . 13

Set power button behaviors . . . . . . . . 13
Set the power plan . . . . . . . . . . . . 13

Transfer data . . . . . . . . . . . . . . . . 13

Connect to a Bluetooth-enabled device (for
selected models)

. . . . . . . . . . . . 13

Use the optical drive (for selected models)

. . 14

Use a media card (for selected models) . . . . 14

Purchase accessories . . . . . . . . . . . . 14

Chapter 4. Secure your computer
information . . . . . . . . . . . . . . . 15

Use passwords .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
Use computrace Agent software embedded in
firmware (for selected models) .  .  .  .  .  .  .  .  .  16
Use BIOS security solutions .  .  .  .  .  .  .  .  .  .  16

Erase all storage drive data .  .  .  .  .  .  .  .  16
Use the cover presence switch .  .  .  .  .  .  .  16
Use Intel BIOS guard .  .  .  .  .  .  .  .  .  .  .  17
Use Smart USB Protection.  .  .  .  .  .  .  .  .  17

Chapter 5. UEFI BIOS . . . . . . . . . 19

What is UEFI BIOS.  .  .  .  .  .  .  .  .  .  .  .  .  .  19
Enter the BIOS menu.  .  .  .  .  .  .  .  .  .  .  .  .  19
Navigate in the BIOS interface .  .  .  .  .  .  .  .  .  19
Change the display language of UEFI BIOS .  .  .  .  19
Change the display mode of UEFI BIOS .  .  .  .  .  20
Set the system date and time .  .  .  .  .  .  .  .  .  20

Change the startup sequence .  .  .  .  .  .  .  .  .  20
Change BIOS settings before installing a new
operating system .  .  .  .  .  .  .  .  .  .  .  .  .  .  21
Update UEFI BIOS.  .  .  .  .  .  .  .  .  .  .  .  .  .  21

Chapter 6. Hardware removal and
installation . . . . . . . . . . . . . . . 23

Handling static-sensitive devices .  .  .  .  .  .  .  .  23
Customer Replaceable Units.  .  .  .  .  .  .  .  .  .  23
Preparing your computer .  .  .  .  .  .  .  .  .  .  .  24
Removing and installing hardware

. . . . . . . 27

Completing the parts replacement . . . . . . . 89

Chapter 7. Help and support . . . . . 93

Self-help resources . . . . . . . . . . . . . 93
Call Lenovo . . . . . . . . . . . . . . . . 94

Before you contact Lenovo

. . . . . . . . 94

Lenovo Customer Support Center . . . . . . 95

Purchase additional services. . . . . . . . . . 96

Appendix A. Important safety
information . . . . . . . . . . . . . . . 97

Appendix B. Accessibility and
ergonomic information . . . . . . . . 111

Appendix C. Supplemental
information about the Ubuntu operating
system . . . . . . . . . . . . . . . . . 113

Summary of Contents for ThinkStation P330







































































































































Search results

Summary of Contents for ThinkStation P330

Reviews:

Related manuals for ThinkStation P330

Brands by name

Popular brands

Lenovo ThinkStation P330, User Manual

Search results

Summary of Contents for ThinkStation P330

Reviews:

Related manuals for ThinkStation P330

Brands by name

Popular brands